LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Heating, Ventilation And Air Conditioning) >> Diagnostic Information and Procedures >> Leak Testing >> Testing the Compressor Shaft Seal

Testing the Compressor Shaft Seal

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Blow shop air behind and in front of the compressor clutch/pulley for at least 15 seconds.
  2. Wait 1-2 minutes.
  3. Probe the area in front of the pulley. If the detector emits a solid alarm, there is a leak.
scientia non olet · About LEMON Manuals