LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Power Steering System) >> Repair Instructions >> Steering Gear Cylinder Pipe Seals Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Steering Gear Cylinder Pipes, Rack & Pinion Housing
    GM1251827Courtesy of GENERAL MOTORS CORP.
  1. Siphon the power steering fluid from the fluid reservoir.
  2. Disconnect and remove the steering gear cylinder pipes at the rack and pinion housing. Remove the O-ring seals from the housing.