LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Power Steering System) >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Cleaner Housing & Housing Bolts
    GM1248375Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner housing by removing the housing bolts and loosening the clamp.
    2. Fig 2: Power Steering Fluid/ Pressure & Supply Lines
    GM1248373Courtesy of GENERAL MOTORS CORP.
  2. Drain the power steering fluid by disconnecting the pressure and supply lines from the pump.
    3. Fig 3: Accessory Drive Belt
    G00563586Courtesy of GENERAL MOTORS CORP.
  3. Remove the accessory drive belt.
  4. Remove the right side engine cooling fan. Refer to COOLING FAN REPLACEMENT - ELECTRIC .
  5. Remove the air conditioning A/C compressor. Refer to COMPRESSOR REPLACEMENT .
  6. Remove the right front wheel. Refer to Tire and Wheel Removal and Installation .
  7. Remove the right side engine under cover.
  8. Remove the A/C compressor mounting bracket.
  9. Remove the pump assembly from the A/C compressor mounting bracket by removing the steering pump retaining nuts.
scientia non olet · About LEMON Manuals