LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Power Steering System) >> Diagnostic Information and Procedures >> Power Rack and Pinion Steering Gear Bench Testing >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop the engine.
  2. Disconnect the power steering pipes from the power steering gear.
  3. Remove the extensions and reconnect the pressure and return lines.
  4. Install and connect the power steering gear. Refer to Power Steering Gear Replacement .
  5. Start the engine and allow it to idle for 10 seconds.
  6. Check the power steering fluid level.
scientia non olet · About LEMON Manuals