Installation Procedure
WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the clock with the screws.
Tighten: Tighten the clock screws to 2.5 N.m (23 lb in).
- Install the instrument panel center upper cover. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.