LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Manual Transmission -- D16) >> Repair Instructions >> Drive Axle Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Drive Axle Seal Using A Hammer & KM-519
    GM1248183Courtesy of GENERAL MOTORS CORP.
  1. Install the new drive axle seal using the KM-519  (1) and a hammer. See Special Tools and Equipment .
  2. Coat the seal lip with the transaxle fluid.
  3. Install the drive. Refer to Inner Axle Shaft Replacement - Front Drive Axle in Front Drive Axle.
scientia non olet · About LEMON Manuals