Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Trim Panel With Screws

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

Disconnect the negative battery cable.
Remove the trim panel screws.
Remove the trim panel.

Fig 2: Connecting Stop Lamp Switch And Connector Assembly

Courtesy of GENERAL MOTORS CORP.

Turn the stop lamp switch and the connector assembly, and pull it from the brake pedal bracket.
Separate the stop lamp switch from the connector to replace the stop lamp switch.