One Way Clutch Assemble

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: One-Way Clutch & 2nd Brake Hub

Courtesy of GENERAL MOTORS CORP.

Install the retainer to the 2nd brake hub.
Install the one-way clutch.

Fig 2: Removing Snap Ring From 2nd Brake Hub Using A Screwdriver

Courtesy of GENERAL MOTORS CORP.

Using a screwdriver, install the snap ring.

Fig 3: Turning Rear Planetary Sun Gear & One-Way Clutch

Courtesy of GENERAL MOTORS CORP.

Install the one-way clutch and thrust washer to the rear planetary sun gear.
Hold the rear planetary sun gear and turn the one-way clutch. The one-way clutch should turn freely clockwise and should lock counterclockwise.