LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement - Windshield Washer >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Washer Hose and Washer Reservoir
    GM1248441Courtesy of GENERAL MOTORS CORP.
  1. Connect the washer hose to the washer reservoir.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front wheel well splash shield with the screws.

    Tighten:  Tighten the front wheel well splash shield screws to 1.5 N.m (13 lb in).

  3. Install the front left wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Connect the windshield washer hose to the washer nozzles on the hood.
  5. Close the hood.
scientia non olet · About LEMON Manuals