LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls - 1.6L (L91) (Introduction)) >> Repair Instructions >> Intake Manifold Tuning (IMT) Valve Actuator Solenoid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Intake Manifold Tuning Valve Solenoid
    GM1464836Courtesy of GENERAL MOTORS CORP.
  1. Install the IMT valve solenoid.
  2. Connect the vacuum hoses to the IMT valve solenoid (2).
  3. Connect the IMT valve solenoid (2) connector.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals