Evaporative Emission System Tester

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

The J 41413-200 Evaporative Emission System Tester is used to help locate leaks in the evaporative emission (EVAP) system. See Special Tools and Equipment . The EEST provides a clean, dry, regulated supply of nitrogen to pressurize the EVAP system. It also provides smoke to help in locating the leak source. Refer to the directions on the cart for proper operation.

The GE-41415-50 Fuel Tank Cap Adapter is used to adapt the J 41413-200 to the fuel filler neck. See Special Tools and Equipment . Pressurizing, or inducing smoke to the EVAP system at the fuel filler neck allows testing of the filler neck and the fuel fill cap on vehicles with onboard refueling vapor recovery (ORVR).

The J 41413-SPT High Intensity White Light is used to help locate the leak source. See Special Tools and Equipment .