LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Frame And Underbody) >> Repair Instructions >> Engine Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View of Nuts, Bolts, and Engine Under Cover
    GM1252046Courtesy of GENERAL MOTORS CORP.
  1. Install the engine under cover with the bolts and nuts.

    Tighten:  Tighten the engine under cover nuts and bolts to 3.5 N.m (31 lb in).

  2. Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals