Carbon Dioxide Arc Welder (MIG ARC Welding)
WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
This welding process uses inexpensive carbon dioxide instead of expensive inert gases as a shielding means. Consumable metal electrodes are employed. It has a wide range of applications, including butt welding of thin plate, fillet welding, plug welding, and MIG spot welding. In terms of the weld strength, it is also highly stable.
| Callout | Component Name |
|---|---|
| 1 | Single Phase 110V/Three Phase 200-240V |
| 2 | Gas Regulator |
| 3 | Carbon Dioxide or Argon and Carbon Dioxide |
| 4 | Welding Power Supply (Built in Wire Feed Mechanism) |
| 5 | Welding Torch |
| 6 | Work Piece |
| 7 | Work Cable |
| 8 | Ground Wire |
| 9 | Input Cable |
| 10 | Gas Hose |
| 11 | Butt Weld |
| 12 | Fillet Weld |
| 13 | Spot Weld |
| 14 | Plug Weld |