Conditions for Clearing the DTC

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

The TCM turns off the MIL lamp when no further failures are detected on the next ignition cycles.
The scan tool can clear the DTC from the TCM history.
The TCM clears the DTC from the TCM history memory after 40 consecutive ignition cycles without fault.
The TCM detects the ON signal of the SS2 monitor during 160 ms when SS2 driver outputs the ON signal and TCM detects the OFF signal of the SS2 monitor during 160 ms when SS2 driver outputs the OFF signal.