Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Inlet Grille Screws | 2 N.m | 18 lb in |
| Fender Screws-Rear of Fascia | 4 N.m | 35 lb in |
| Fender-to-Windshield-Pillar Bolt | 8 N.m | 71 lb in |
| Front Bumper Fascia-to-Fender Screw | 1.5 N.m | 13 lb in |
| Hinge Bolts | 20 N.m | 15 lb ft |
| Hood Latch Screws | 8 N.m | 71 lb in |
| Hood Release Handle Screws | 1.5 N.m | 13 lb in |
| Hood-to-Hinge Bolts | 20 N.m | 15 lb ft |
| Lower Fender Bolts | 10 N.m | 89 lb in |
| Splash Shield Screws | 1.5 N.m | 13 lb in |
| Upper Fender Bolts | 10 N.m | 89 lb in |