LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Hood Release Cable, Screws, and Hood Latch
    GM1252064Courtesy of GENERAL MOTORS CORP.
  1. Connect the hood release cable to the latch.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the hood latch with the screws.

    Tighten:  Tighten the hood latch screws to 8 N.m (71 lb in).

scientia non olet · About LEMON Manuals