LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Rear Compartment Lid >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Nuts and Lock Cylinder
    GM1252086Courtesy of GENERAL MOTORS CORP.
  1. Remove the hatchback door lower garnish molding, if equipped. Refer to Hatchback Door Lower Garnish Molding Replacement in Interior Trim.
  2. Disconnect the lock rod.
  3. Remove the nuts and the lock cylinder.