LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Rear End) >> Repair Instructions >> Latch Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Screws and Hatchback Lock
    GM1252095Courtesy of GENERAL MOTORS CORP.
  1. Connect the lock rods and the electrical connector.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the hatchback lock with the screws.

    Tighten:  Tighten the hatchback door lock screws to 6 N.m (53 lb in).

  3. Install the hatchback door lower garnish molding. Refer to Hatchback Door Lower Garnish Molding Replacement in Interior Trim.
  4. Close the hatchback door.
scientia non olet · About LEMON Manuals