Diagnostic Aids
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- Do not clear the DTC unless directed by a diagnostic procedure. Clearing the DTC will erase all Freeze Frame/Failure Records stored in engine control module (ECM) memory.
- Poor engine performance can sometimes be mis-diagnosed as a transmission concern. In order to avoid unnecessary transmission work, always perform the Diagnostic System Check - Vehicle .
- Use a scan tool that is known to function correctly. If necessary, test the scan tool on another vehicle.
- Ensure the scan tool contains the most current file available.
- The scan tool will display a loss of communication error message under the following conditions:
- ECM power is interrupted.
- The ignition switch is turned OFF.
- The battery voltage level is very low.
- A poor connection at the diagnostic link connector (DLC)