Clutch Rotor and/or Bearing Install (V5 Compressor): Notes

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 33017 Pulley Rotor and Bearing Assembly Installer. See Special Tools .
J 33019 Bearing Staking Guide/Bearing Staking Pin. See Special Tools .
J 33023-A Puller Pilot. See Special Tools .
J 42428 Compressor Holding Fixture. See Special Tools .
J 6083 Snap Ring Pliers
J 8092 Driver Handle. See Special Tools .
J 8433-1 Puller Crossbar. See Special Tools .
J 8433-3 Forcing Screw. See Special Tools .
J 9481-A Bearing Installer. See Special Tools .