LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Intake Ducting To Engine
    GM1241530Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing bolts and the air filter housing assembly.
  3. Fig 2: Electrical Connector & Pressure Transducer
    GM1251931Courtesy of GENERAL MOTORS CORP.
  4. Release the connector lock and pull the air conditioning (A/C) pressure transducer wire connector out.
  5. Hold the line fitting boss with one wrench and remove the A/C pressure transducer with another wrench.
  6. Discard the O-ring seal.