LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Theft Deterrent System) >> Repair Instructions >> Theft Deterrent Alarm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Theft Deterrent Alarm, Mounting Bolts, and Electrical Connector
    GM1252098Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the theft deterrent alarm with the mounting bolts.

    Tighten:  Tighten the theft deterrent alarm bracket mounting bolts to 11 N.m (97 lb in).

  2. Connect the theft deterrent alarm electrical connector.
scientia non olet · About LEMON Manuals