LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Manual Transmission Clutch System) >> Repair Instructions >> Release Bearing Replacement >> Release Bearing and Shaft Inspection >> Shaft Inspection

Shaft Inspection

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following release bearing shaft inspection

    Fig 1: Warped Shaft & Worn Fork
    GM1375141Courtesy of GENERAL MOTORS CORP.
  1. Inspect for a warped shaft (1).
  2. Inspect for a worn fork (2).
  3. Replace the shaft if necessary.