LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch, Pressure Plate, and Pilot Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Battery Disconnect Caution .
    Fig 1: Pressure Plate & Bolts
    GM1251799Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable.
  2. Remove the transaxle from the vehicle. Refer Transmission Replacement for the D16 transaxle, or Transmission Replacement for the Y4M transaxle.
  3. Remove the pressure plate bolts and the pressure plate.
    4. Fig 2: Clutch Disc
    GM1251800Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Support the pressure plate when you remove the last bolt.
  4. Remove the clutch disc from the flywheel
scientia non olet · About LEMON Manuals