LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pilot Bearing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: 09925-98210, J 35271 & Input Shaft Bearing
    GM1375554Courtesy of GENERAL MOTORS CORP.
  1. Install the input shaft bearing using the 09925-98210  (2) and J 35271  (1). See Special Tools .
  2. Install the pressure plate. and the clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement .
  3. Remove the J 35271  (1) from the flywheel. See Special Tools .
  4. Install the transaxle to the vehicle. Refer to Transmission Replacement for the D16 transaxle or Transmission Replacement for the Y4M transaxle.
scientia non olet · About LEMON Manuals