Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the clutch cable. Refer to Clutch Cable Replacement .
- Remove the clutch pedal bracket mounting bolts from the cowl.
- Release the clutch pedal return spring.
- Remove the clutch pedal shaft nut.
- Remove the clutch pedal shaft.
- Remove the clutch pedal from the mounting bracket.
- Remove the clutch pedal mounting shaft bushings.
- Remove the clutch pedal return spring.
CAUTION:
Refer to Battery Disconnect Caution
.