LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Inner Belt >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Channel Molding
    GM1248294Courtesy of GENERAL MOTORS CORP.
  1. Remove the door trim panel. Refer to Trim Panel Replacement - Front Door in Interior Trim.
  2. Straighten the retaining tabs in order to release the channel molding to the door trim panel.
  3. Remove the channel molding.
scientia non olet · About LEMON Manuals