LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Inner Belt >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Channel Molding
    GM1248294Courtesy of GENERAL MOTORS CORP.
  1. Install the channel molding onto the door trim panel.
  2. Bend the retaining tabs to secure the channel molding to the door trim panel.
  3. Install the door trim panel. Refer to Trim Panel Replacement - Front Door in Interior Trim.
scientia non olet · About LEMON Manuals