LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine Mechanical - 1.6L) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Supporting Engine Assembly Using J 28467-B
    GM1371916Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the upper radiator cover.
  3. Remove the right front splash shield.
  4. Support the engine assembly using the J 28467-B  (1).
    5. Fig 2: View Of Crossmember, Nuts, And Bolts
    GM1371917Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine mount bracket retaining bolts.
    6. Fig 3: View Of Engine Mount
    GM1371918Courtesy of GENERAL MOTORS CORP.
  6. Remove the engine mount retaining nuts.
  7. Lower the engine.
  8. Remove the engine mount.
scientia non olet · About LEMON Manuals