LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine Mechanical - 1.6L) >> Repair Instructions - On Vehicle >> Engine Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Cover
    GM1291141Courtesy of GENERAL MOTORS CORP.
  1. Position the engine cover on the engine.
  2. NOTE: Refer to Fastener Notice .
  3. Install the engine cover bolts and nuts.

    Tighten:  Tighten the engine cover bolts and nuts to 10 N.m (89 lb ft).