LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Manual Transaxle - Y4M) >> Repair Instructions - Off Vehicle >> Shift Shaft and Fork Assemblies Disassemble >> 3rd-4th Gear Shift Shaft Assembly

3rd-4th Gear Shift Shaft Assembly

WARNING: This page is about a different car, the 2008 Pontiac Wave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: 3rd-4th Gear Shift Shaft Assembly
    GM1241249Courtesy of GENERAL MOTORS CORP.
  1. Disassemble the 3rd-4th gear shift shaft assembly.
  2. Remove the gear unit. Refer to Transmission Disassemble .
  3. Remove the each shift shaft assembly from the gear unit.
  4. Fix the 3rd-4th gear shift shaft assembly to a vise with protector.
  5. Remove the 3rd-4th gear fork pin using a pin punch and a hammer.
  6. Remove the 3rd-4th gear fork (4).
  7. Remove the 3rd-4th gear shift yoke pin (1) using a pin punch and a hammer.
  8. Remove the 3rd-4th gear shift yoke (2).
scientia non olet · About LEMON Manuals