LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Manual Transaxle - Y4M) >> Repair Instructions - Off Vehicle >> Shift Shaft and Fork Assemblies Assemble >> 5th Reverse Gear Shift Shaft Assembly

5th Reverse Gear Shift Shaft Assembly

WARNING: This page is about a different car, the 2008 Pontiac Wave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: 5th Reverse Gear Shift Shaft Assembly
    GM1241250Courtesy of GENERAL MOTORS CORP.
  1. Place the shift shaft into a vise with protector.
  2. Install the 5th gear shift yoke.
  3. Install the 5th gear shift yoke pin using a pin punch and a hammer.
  4. Install the reverse gear shift arm.
  5. Install the reverse gear shift arm pin using a pin punch and a hammer.
  6. Install the reverse shift guide ball and spring.
  7. Install the 5th reverse gear ball.
  8. Install the shift shaft by pushing (1).
  9. Install the each shift shaft assembly into the gear unit.
  10. Install the gear unit. Refer to Transmission Assemble .
scientia non olet · About LEMON Manuals