LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - 1.6L (L91) - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Canister Purge Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

    Fig 1: EVAP Canister Purge Solenoid Bracket
    GM1256165Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the evaporative emission (EVAP) canister purge solenoid connector.
  3. Disconnect the vacuum hoses from the EVAP canister purge solenoid.
  4. Remove the EVAP canister purge solenoid bracket bolt from the intake manifold.
  5. Unclip the EVAP canister purge solenoid from the mounting bracket.
scientia non olet · About LEMON Manuals