LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.6L (L91) >> Repair Instructions >> Exhaust Manifold Removal >> Exhaust Manifold Installation

Exhaust Manifold Installation

    Fig 1: Installing And Tightening Sequence Of Exhaust Manifold Retaining Nuts
    GM1291216Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust manifold and gasket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the exhaust manifold retaining nuts and tighten in the sequence shown.

    Tighten:  Tighten the exhaust manifold retaining nuts to 25 N.m (18 lb ft).

    3. Fig 2: View Of Exhaust Manifold Nuts And Pup Converter
    GM1291211Courtesy of GENERAL MOTORS CORP.
  3. Install the exhaust manifold nuts to the catalytic converter.

    Tighten:  Tighten the exhaust manifold nuts to 40 N.m (30 lb ft).

scientia non olet · About LEMON Manuals