Coolant Heater Inoperative
Coolant Heater Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Engine Cooling |
| 2 | Test the engine coolant heater power supply cord for an open or short to ground. Refer to Circuit Testing
in Wiring Systems. Did you find the condition? |
Go to Step 3 | Go to Step 4 |
| 3 | Replace the engine coolant heater power supply cord. Refer to Coolant Heater Cord Replacement . Did you complete the repair? |
Go to Step 6 | - |
| 4 | Inspect for poor connections at the harness connector of the engine coolant heater. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
in Wiring Systems. Did you find the condition? |
Go to Step 6 | Go to Step 5 |
| 5 | Replace the engine coolant heater. Refer to Coolant Heater Replacement . Did you complete the repair? |
Go to Step 6 | - |
| 6 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |