LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Trim Panel With Screws
    GM1242050Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the trim panel screws.
  3. Remove the trim panel.
    4. Fig 2: Stop Lamp Switch And Connector Assembly
    GM1242051Courtesy of GENERAL MOTORS CORP.
  4. Turn the stop lamp switch and the connector assembly, and pull it from the brake pedal bracket.
  5. Separate the stop lamp switch from the connector to replace the stop lamp switch.
scientia non olet · About LEMON Manuals