Adjustment Procedure
- Remove the brake drum. Refer to Brake Drum Replacement .
- Using the rear brake adjuster nut, turn the adjuster assembly in until a sufficient amount of drag occurs on the brake drum.
- Place the parking brake lever stops against the edge of the shoe web. If necessary, loosen the park brake cable at the equalizer. Refer to Park Brake Lever Assembly Replacement .
- Install the brake drum. Refer to Brake Drum Replacement .
- Apply the brake pedal at least 10 times. Verify the clicking sound of the adjuster assembly is not audible from either brake drum.
- Adjust the park brake. Refer to Park Brake Adjustment .
CAUTION:
Refer to Brake Dust Caution
in Cautions and Notices.
IMPORTANT:
If the clicking sound of the adjuster assembly is not audible from either brake drum, the clearance between the brake shoes and the drum is adjusted.