LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Brake Shoe Replacement >> Removal Procedure

Removal Procedure

  1. Remove the brake drum. Refer to Brake Drum Replacement .
    2. Fig 1: View of Antilock Brake System (ABS) Braking System Configuration
    GM1245727Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Brake Dust Caution in Cautions and Notices.
  2. Loosen the leading shoe hold-down return spring. The antilock brake system (ABS) braking system configuration is illustrated.
    3. Fig 2: View of Upper Return Spring and Adjuster
    GM1245728Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the upper link of the connecting link spring of the leading shoe to relieve tension on the upper return spring.
  4. Remove the upper return spring and the adjuster.
    5. Fig 3: View of Trailing Shoe and Lining Assembly Hold-Down Return Spring
    GM1245730Courtesy of GENERAL MOTORS CORP.
  5. Unfasten the trailing shoe and lining assembly hold-down return spring.
    6. Fig 4: Detaching Lower Return Spring
    GM1245731Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the trailing shoe and lining assembly on the right side.
  7. Detach the lower return spring.
scientia non olet · About LEMON Manuals