LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Brake Drum Replacement >> Inspection Procedure

Inspection Procedure

  1. Clean the brake components.
  2. Inspect the brake drum and the inner races of the wheel bearings inside the drum. Replace the drum, if necessary. Refer to Brake Drum Surface and Wear Inspection .
    3. Fig 1: View of Adjuster Assembly
    GM1245725Courtesy of GENERAL MOTORS CORP.
  3. Apply lubricant to the adjuster assembly.
  4. Inspect the threads of the adjuster assembly for smooth rotation.
scientia non olet · About LEMON Manuals