LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View of Rotor Splash Shield
    GM1245702Courtesy of GENERAL MOTORS CORP.
  1. Install the splash shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Secure the splash shield to the steering knuckle with the screws.

    Tighten:  Tighten the splash shield-to-steering knuckle screws to 4 N.m (35 lb in).

  3. Install the rotor. Refer to Brake Rotor Replacement .
scientia non olet · About LEMON Manuals