LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Replacement - Rear Split Folding >> Removal Procedure

Removal Procedure

    Fig 1: View of Bolts Securing Rear Seat Backs to Hinges
    GM1248244Courtesy of GENERAL MOTORS CORP.
  1. Lower the rear seat backs.
  2. Remove the bolts that secure the rear seat backs to the hinges.
  3. Remove the rear seat backs by pulling the seat hinge posts out of the lower rear quarter upper trim panel.
scientia non olet · About LEMON Manuals