LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Description and Operation >> Welding Description >> Plate Thickness and Minimum Welding Pitch

Plate Thickness and Minimum Welding Pitch

Fig 1: View of Welding Intervals
GM1309730Courtesy of GENERAL MOTORS CORP.

When the welding intervals (1) are too small, this leads to branching, making it impossible to maintain the desired soldering state.

Welding Description

Plate Thickness 0.6 mm 0.024 in
  0.9 mm 0.035 in
1.2 mm 0.047 in
1.6 mm 0.063 in
Minimum Intervals 11 mm 0.433 in
16 mm 0.630 in
20 mm 0.787 in
24 mm 0.944 in
scientia non olet · About LEMON Manuals