LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Repair Instructions >> Door Sill Plate Replacement - Rear >> Removal Procedure

Removal Procedure

    Fig 1: View of Screw and Rear Rocker Trim Panel
    GM1248486Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat cushion and the rear seatback.

    Refer to Seat Cushion Replacement - Rear .

  2. Remove the screw securing the rear rocker trim panel.
  3. Pry off the rear rocker trim panel.