LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Fascia Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

    Fig 1: View of Screws Behind Fascia
    GM1248505Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear wheels.

    Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

  2. Remove the screws and the mud guards.
  3. Remove the screws and the splash shields.
  4. Remove the screws behind the fascia.
    5. Fig 2: View of Nuts Behind Rear Bumper Energy Absorber
    GM1248506Courtesy of GENERAL MOTORS CORP.
  5. Remove the nuts behind the rear bumper energy absorber.
    6. Fig 3: View of Bolts In Luggage Compartment
    GM1248322Courtesy of GENERAL MOTORS CORP.
  6. Remove the rear cargo area trim panels.

    Refer to Trim Panel Replacement - Cargo Area Rear (Notchback) or Trim Panel Replacement - Cargo Area Rear (Hatchback) in Interior Trim.

  7. Remove the bolts in the luggage compartment.
    8. Fig 4: View of Fascia Screws Beneath Taillamps
    GM1248248Courtesy of GENERAL MOTORS CORP.
  8. Remove the bolts and the exterior trim panels beneath the taillamps.
  9. Remove the fascia screws beneath the taillamps.
    10. Fig 5: View of Rear Fascia
    GM1248249Courtesy of GENERAL MOTORS CORP.
  10. Remove the rear upper fascia screws.
  11. Remove the fascia.
scientia non olet · About LEMON Manuals