LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Strut Replacement - Liftgate >> Installation Procedure

Installation Procedure

    Fig 1: View of Gas Support Assembly From Hatchback Door and Body
    GM1252093Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the gas support assembly onto the hatchback door and the body.

    Tighten:  Tighten the gas support assembly studs to 8 N.m (71 lb in).

  2. Close the hatchback door.
scientia non olet · About LEMON Manuals