LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lock Cylinder Replacement - Rear Compartment Lid >> Removal Procedure

Removal Procedure

    Fig 1: View of Nuts and Lock Cylinder
    GM1252086Courtesy of GENERAL MOTORS CORP.
  1. Remove the hatchback door lower garnish molding, if equipped. Refer to Hatchback Door Lower Garnish Molding Replacement in Interior Trim.
  2. Disconnect the lock rod.
  3. Remove the nuts and the lock cylinder.
scientia non olet · About LEMON Manuals