LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lock Cylinder Replacement - Rear Compartment Lid >> Installation Procedure

Installation Procedure

    Fig 1: View of Nuts and Lock Cylinder
    GM1252086Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the lock cylinder with the nuts.

    Tighten:  Tighten the luggage compartment lock cylinder nuts to 3 N.m (27 lb in).

  2. Connect the lock rod.
  3. Install the hatchback door lower garnish molding, if equipped. Refer to Hatchback Door Lower Garnish Molding Replacement in Interior Trim.
scientia non olet · About LEMON Manuals