LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Hood
    GM1252058Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Install protective coverings over the fenders and the windshield in order to prevent damage to the paint, the glass, and the moldings when removing and installing the hood.
  1. Raise and support the hood.
  2. Remove the washer hose.
  3. Mark the position of the hinge to the hood in order to aid in alignment during installation.
  4. Remove the bolts retaining the hood to both hinges.
  5. With the aid of another technician, remove the hood from the hinges.
scientia non olet · About LEMON Manuals