LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Alarm Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Theft Deterrent Alarm, Mounting Bolts, and Electrical Connector
    GM1252098Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the theft deterrent alarm with the mounting bolts.

    Tighten:  Tighten the theft deterrent alarm bracket mounting bolts to 11 N.m (97 lb in).

  2. Connect the theft deterrent alarm electrical connector.