Conditions for Running the DTC

DTC P0601

• The ignition is ON, with the engine OFF.
• DTC P0601 runs once an ignition cycle.

DTC P0602

• The ignition is ON, with the engine OFF.
• DTC P0602 runs once an ignition cycle.

DTC P0606

• The ignition is ON, with the engine OFF.
• The ignition 1 voltage is more than 11 volts.
• DTC P0606 runs continuously with ignition ON or engine operating.

DTC P2610

• The ignition is ON, with the engine OFF.
• The non-volatile memory has not reset.
• DTC P2610 runs once an ignition cycle.